When you’re a touring artist or band, there are many good reasons to have a tour bus. But before you hit the road, it is important that you get your tour bus ready to go with these essential steps. Not only will these steps ensure your safety and comfort while on the road, but they will also help keep your passengers safe and make sure you can enjoy your travels without any worry.
Pre-Trip Inspection
The first step in getting your tour bus ready for the road is performing a pre-trip inspection of all systems. This includes checking all components such as brakes, tire pressure, fluid levels, lights and turn signals, and other mechanical parts. Make sure to check the oil level and make sure it is at its proper level. Any time you’re about to head out on a long trip in your tour bus, doing this routine checkup can save you from potential problems down the line. Below is more information on how to conduct some of these inspections yourself.
Inspect Brakes
Braking is one of the most important—and most overlooked—parts of pre-trip inspections for tour buses. Make sure to take extra care with brake inspection; if brakes fail while driving, not only could serious harm come to drivers and passengers alike but property damage could occur as well. Inspecting brakes means checking for brake pad wear as well as discoloration or fluid leakage from brake lines. If any irregularities are found in either area of inspection then it is highly recommended that repairs be made before hitting the road again. You can easily get this done at a service station like Coronado Shell.
Check Tire Pressure and Tread Depth
Tires should always be checked prior to going on any trip in your tour bus; this includes both making sure they are properly inflated as well as checking their tread depth. Tire pressure should be checked regularly throughout each trip as well since temperature changes cause fluctuations in air pressure which can affect performance on the road. Low tire pressure can lead to poor traction which can cause accidents or other hazardous situations on the highway. Checking tread depth is also important since worn tires can lead to trouble when braking or cornering at speed. If tread depth falls below 3/32” then new tires should be immediately installed on the vehicle before heading out again.
Check Lights and Signals
Finally, make sure all lights and signals are working properly before you leave on your tour bus trip. Don’t forget turn signals, headlights, taillights, brake lights, and hazard lights! Make sure each light is clean and free of dirt or grime by wiping them down with a clean cloth. If they’re foggy or dimmed out, replace them with new bulbs immediately before hitting the road.
Getting your tour bus ready for the road requires more than just filling up with gas and packing snacks— there are several steps that must be taken ahead of time in order to ensure maximum safety and comfort while traveling. Pre-trip inspections should always include inspecting brakes, tire pressure and tread depth checks, fluid levels checks, and light checks before embarking on any long trips with passengers aboard! Taking these essential steps will help ensure that no matter where you’re headed next, you’ll have a safe journey all around!
